Casting the Model



 < Previous Step |


 Step 5:

Casting the Model

 | Next Step >


Once the model is completed, the casting process can begin. The wax model is attached to a casting tree, where molds for each of the jewelry pieces are created. Each section of the jewelry is created separately so that every piece can be properly prepared prior to assembly. This process is actually referred to as multi-part casting since the model is manufactured in separate parts.


A plaster mold is created around the wax tree, and after a vacuum process to remove any air bubble, the model dried. At that point the wax within is actually burnt out, leaving a negative mold of the jewelry. The molten Gold or Platinum is poured into the flask mold and eventually cools.


The plaster mold is stripped from around the gold or platinum, and the tree remains with the various attached jewelry sections, which are removed and sent for assembly.


 Casting Oven

The Casting Oven

 Casting Oven Heat

Casting Oven Heat

 Casting Holder

Casting Holder

 Building the Casting Tree

Building the Casting Tree

Casting Tree

Casting Tree Before and After

 Casting_Tree.jpg

Medal Casting Tree

 A 3D Model and its Manufactured Product

A Medal Casting and It's Created Ring


Skip to any of the other steps in the manufacturing process of jewelry design

1

2

3

4

5

6

7

8

9

< Previous Step

Step 5: Casting the Model

    Next Step >

Popular Articles View more articles
Article Image

Make a Statement We know that these pink beauties are pretty pricey, but that doesn't mean you can't create something that is not only beautiful but impressive

Article Image

Follow the Yellow Gold Road Regardless of the metal color you choose for your piece, using a yellow gold basket and prongs will maximize the color of the diamond.

Article Image

Design-Your-Own (DYO) fancy color diamond jewelry with these easy steps